Nokia LX11 M11

Specifications


NOKIA LX11 & M11

NOTES: These are dual NAM units.
The ESN prefix is 165 decimal & A5 hex.
Nokia: 813-536-5553

NAM PROGRAMING:

1. Turn power on.

2. Enter * 3 0 0 1 # S S S S S SEL 9 END where SSSSS is the security code
1 2 3 4 5 is the factory default.

3. If the above was successful the phone will display “IdEnt IF InFO Pri”

Skip to step 6 to program NAM 1, or complete steps 4 & 5 to switch to NAM 2.

4. Press SND and the phone will display “OPt InFO diSAbLEd”

5. Press SND and the phone will display “OPt InFO EnAbLEd”

6. Press END, the first data entry will be displayed.

7. Press END to store and increment each step.

8. The SND key toggles single digit options.

9. Press SEL CLR to exit programing having entered all steps.

PROGRAMING DATA

STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION

01 00000 – 32767 HO-Id SYSTEM ID
02 0 OR 1 MIN Mark MIN MARK
03 0 OR 1 LOCL OPt LOCAL USE MARK
04 10 DIGITS Phonxx MIN (AREA CODE & TEL#)
05 08 ONLY St CLASS STATION CLASS MARK
06 333 OR 334 PAging Ch INITIAL PAGING CHANNEL
07 2 DIGITS O-LOAd CLASS ACCESS OVERLOAD CLASS
08 A OR B PrEF SyS PREFERRED SYSTEM (SND TOGGLES)
09 2 DIGITS grOUP Id GROUP ID (10 IN USA)
10 5 DIGITS SECUrity SECURITY CODE
11 MM/DD/YY 1 dAtE CAN NOT BE CHANGED
12 MM/DD/YY 2 dAtE INSTALLATION DATE

13 Prog done PRESS SEL CLR TO EXIT

LOCK: SEL LCK. UNLOCK: Enter four digit code.

SYSTEM SELECT: SEL 1 then 1 to scroll: A = A only, b = B only, S = Pref/non
pref, H = Home only.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s